Members get 10% off

Halcyon Eclipse MC Buoyancy Compensator, single tank bladder

CE approved single tank wing

The Halcyon Eclipse wing. Think of it as a Pioneer wing gone to the gym. Halcyon builds the Eclipse's outer shell from 1680-denier ballistic nylon. We then add an inner bladder constructed from the same puncture-resistant 400-denier Nylon inner-bladder material used in the Explorer. In other words, the Eclipse is a low profile, exploration-grade wing that leaves all other single tank designs in its shadow. Streamlined. Ruggedized. Another example of Halcyon taking the game to the next level.

The Eclipse wings share the Pioneer's long, narrow, wing profile to support the diver's tank along his or her entire length, preventing unnecessary drag and minimizing effort. A circular zipper around the inside of the wing allows for easy inspection and replacement of the interior bladder.

A choice of lift capacities helps to maximize comfort and streamlining while accounting for various buoyancy requirements that result from differences in tank size, exposure protection, or equipment requirements.

Eclipse wings require a single tank adapter to mount with your Secure Harness backplate system. Pioneer wings continue to utilize Halcyon’s adapter-free design and only require a set of Halcyon cam straps for mounting.

Eclipse wings are available in 30 and 40 lbs lift capacities. All Eclipse wings are CE-certified for sale in the European Community.

All Halcyon wings now come with our newly designed precision-flow inflator. The internal components and buttons are 316 stainless steel. Halcyon’s inflator provides a controlled low-volume air flow to allow the diver to fine tune their buoyancy and resist freezing in extremely cold conditions. The Halcyon inflator is another Halcyon innovation that will only be found on Eclipse, Pioneer, and Explorer wings.

30 or 40 lbs lift capacity/Aluminum or Stainless Steel backplate

Price From: 28,500 TBH

Members get 10% off

Halcyon Pioneer MC Buoyancy Compensator, single tank bladder

Single tank wing, backplate with secure Harness and Storage Pak, integrated single tank mounting system

Pioneer Buoyancy Compensators are specifically designed for single tank use, facilitating streamlining and diving ease with the our standards-setting narrow wing design.

Specially designed buoyancy incorporates a built-in single tank adaptor welded into the "backbone" of the Pioneer wing
No more separate pieces-- wings now rest inches closer to the diver.
Ultimate streamlining and convenience
Pioneer Buoyancy Compensators are specifically designed for single tank use, facilitating streamlining and diving ease through our unique narrow wing design

Halcyon Pioneer wings incorporate an integrated single tank mounting system, eliminating the need for a separate single tank adapter (patent pending). This unique feature, available only from Halcyon, is the ultimate low profile single tank system for recreational diving or travel. Three different lift capacities maximize comfort and streamlining while accounting for various buoyancy requirements that result from differences in tank size, exposure protection, or equipmet requirements.

Pioneer 27 Wings
The immensely popular 27 lbs. wing is ideally suited for diving in tropical to temperate waters where moderate exposure protection and neutrally buoyant tanks are commonly used. The 27 lbs. wing utilizes a circular buoyancy tube to prevent air from being trapped in one side of the wing.

Pioneer 36 and 45 Wings
The 36 lbs. wing is designed for use in cold water where heavy exposure protection with steel cylinders is the norm. Bellowed side panels on the 36 lbs. wing increase lift at the waist, improving trim for those wearing heavy weight belts. Like the 27 lbs. wing, the 36 lbs. wing also features a circular buoyancy tube for ultimate stability in the water.

The Pioneer 45 wing is specifically designed for extreme cold water use or where lift must be capable of offsetting unusual amounts of applied ballast. This system is not recommended for typical recreational diving.

All Halcyon wings now come with our newly designed precision-flow inflator. The internal components and buttons are 316 stainless steel. Halcyon’s inflator provides a controlled low-volume air flow to allow the diver to fine tune their buoyancy and resist freezing in extremely cold conditions. The Halcyon inflator is another Halcyon innovation that will only be found on Eclipse, Pioneer, and Explorer wings

27 lbs lift capacity/Aluminum or Stainless Steel backplate
Price: 26,000 TBH

36 lbs lift capacity/Aluminum or Stainless Steel backplate
Price: 26,000TBH

45 lbs lift capacity/Aluminum or Stainless Steel backplate
Price: 26,000 TBH

Members get 10% off

Halcyon Explorer MC Buoyancy Compensators

CE approved double tank wing, backplate with Secure harness and Storage Pak

Halcyon offers the Explorer wing for double tank diving . The Explorer wings are available in three lift capacities to satisfy various buoyancy requirements, and are able to accommodate a wide range of tank sizes, exposure protection, and equipment requirements. Halcyon explorer wings are available in 40 lbs., 55 lbs., and 70 lbs. lift capacities.

Explorer wings have been slightly modified for even greater streamlining and efficiency. The new Explorer wing is slightly narrower and longer, with a reduced buoyancy tube behind the neck to minimize heads-up trim. In addition, the inflator elbow is now located in the back center of the wing to eliminate hitting the tank neck during full inflation.

Halcyon's Explorer wing is still made from the most rugged materials available for a buoyancy compensator. The 400 denier nylon bladder has a tighter weave and is therefore more puncture resistant than a broad weave. The Explorer's 1680 ballistic nylon outer shell is designed for maximum abrasion resistance. The two materials used together offer the best protection from damage in any wing design.

Heavy-duty zipper has a three-inch wide strip of Cordura to prevent zipper chaff on the inner bladder
Two-inch webbing-reinforced backbone construction
"Trap-door" drainage system allows water to drain rapidly from the outer cover to minimize excess weight and diver effort reboarding the dive boat
Inflator elbow strain relief constructed from two-inch nylon webbing minimizes wear on this connection
Narrower, elongated construction improves streamlining and trim
Relocated corrugated hose eliminates stress from impact with tanks
All Explorer wings are CE-certified for sale in the European Community

The Explorer wings can be mated with either the Halcyon hard-coated aluminum or six pound stainless steel backplate, providing divers with a variety of weighting solutions. The 40 lbs. Explorer wings provide a minimalist approach to buoyancy where double aluminum 80s and a wetsuit are the rig of choice. The widely popular 55 lbs. Explorer wings are ideally suited for use with situations requiring additional lift such as with heavy double steel tanks.

The 70 lbs. Explorer wing is designed specifically for heavier steel tanks and multiple stages where divers are unable to attain proper lift from the Explorer 55 lbs. wing.

All Halcyon wings now come with our newly designed precision-flow inflator. The internal components and buttons are 316 stainless steel. Halcyon’s inflator provides a controlled low-volume air flow to allow the diver to fine tune their buoyancy and resist freezing in extremely cold conditions. The Halcyon inflator is another Halcyon innovation that will only be found on Eclipse, Pioneer, and Explorer wings.

40 lbs/55lbs/70lbs lift capacity with Aluminum or Stainless Steel backplate

Price: 24,500 TBH

Members get 10% off

Halcyon Secure Harness System

Complete Secure Harness backplate/webbing systems

The Halcyon Secure Harness allows for infinite adjustability, providing a perfect fit for all divers and diving systems. Men or women diving wet or dry will find the Secure Harness is without question the most stable and well-fitted design in the industry.

Secure Harness

Five point system insures snug fit and eliminates tank roll and drift
MC Storage Pak provides "transparent" storage for alternate lift and signaling devices
Bent D-rings facilitate one-handed storage of accessories like Scout lights or stage bottles
Complete adjustability of D-rings eliminates inappropriate attachment points.

Backplate

Specially designed for mating with Pioneer wing on a single tank- no adaptor required!
Backplate is available in six lbs. stainless steel and aluminum
Utility holes allow mating with MC Storage Pak to stow a variety of lift devices
Military-grade hardcoat protects the Halcyon aluminum backplate from corrosion and scratching

Complete harness with coated Aluminum or Stainless Steel backplate

Steel Price: 10,000 TBH

Aluminium Price: 9,500 TBH

Members get 10% off

Single Tank Adaptors

Stainless steel adaptor allows divers to secure older style Halcyon Pioneer wings with a single tank to conventional backplates, or current Pioneer wings to non-Halcyon backplates.
New Weighted STA provides six pounds of non-ditchable ballast.
Stainless steel single tank adapter

Price: 4,500 TBH

Members get 10% off

Harness Pocket

Perfect for travel, when you might be using a rental wet or dry suit without the proper thigh pockets.
Slides onto the Secure Harness strap; rigid ABS-reinforced plate holds pocket shape during dive.
Pocket helps to secure the long hose of your first stage if you are not using a canister light.
Zippered enclosure.
Right hand zippered pocket (attaches to harness strap)

Price: 4,500 TBH

Members get 10% off

DIR Regulator Hose Kit

Proper hose length is an essential component of a safe and comfortable diving rig. Primary hoses that are too short present potentially uncomfortable and dangerous air-sharing situations, while excess hose decreases the streamlining of a rig and creates entanglement hazards. Halcyon's DIR hose kit provides a diver with the hoses necessary to complete a single or double tank rig or stage bottle, including the primary, secondary, and SPG hoses in the correct lengths for each. Halcyon hoses are made in our High Springs facility and can be custom ordered to any length.

please enquire for more information